Archives: Documents
VOC Emission Emissions | Stonini | Plasterboard with Glass Fibre
This certificate confirms that Stonini panels produce very low VOC and formaldehyde emissions, meeting strict indoor air quality requirements and supporting use in projects pursuing healthy or sustainable building standards.
Stonini Installation Guide
The installation guide provides recommended methods for fixing Stonini panels, including suitable substrates, adhesives, joint details, and handling instructions to ensure a safe and professional installation.
Stonini Fire Rating Enternal
This certificate confirms the fire performance of Stonini wall panels when tested to Australian Standard AS 1530.1. The results show the panels are not deemed combustible, making them suitable for many architectural applications where fire safety compliance is required.
Stonini Fire Rating (Internal)
This report verifies that Stonini panels achieve a Group 1 fire classification under AS/NZS 3837 testing, the highest rating for wall and ceiling linings under the Building Code of Australia, allowing them to be used in many commercial and residential interior environments.
S Series – Fire Test Report
This report confirms that S Series Interior Film was tested by the Flame Proof Institute and meets national fire safety standards, demonstrating fire-retardant performance suitable for interior applications.
B Series – Fire Retardant Test Certificate
This document confirms that B Series (Bodaq Interior Film) has been independently tested by MPA NRW and meets the B1 fire-retardant standard (DIN 4102-1), certifying it as flame-resistant for safe use in interior applications.
3M DI-NOC EX Series – Technical Data Sheet (2021)
Comprehensive technical specifications for DI-NOC EX Series for exterior use.
3M DI-NOC – HealthPartners Case Study
Case study showing successful hospital refurbishment with 3M DI-NOC to save time and cost.
3M DI-NOC – Flammability Test Report (AS 1530)
Fire hazard indices for metallic DI-NOC film under Australian Standard 1530.3.
3M DI-NOC PS Series – Antimicrobial Technical Bulletin (2020)
Confirms antimicrobial properties of DI-NOC PS Series, effective in reducing bacteria.
3M DI-NOC – Product Bulletin (2021)
Overview of 3M DI-NOC product line, its applications and features.
3M DI-NOC – Fire Hazard Test Report (AS 5637)
Confirms 3M DI-NOC achieves Group 1 classification under Australian fire standards.
B Series – Tensile Strength Test Report
Demonstrates durability through tensile strength testing.
B Series – Right-Angle Tear Load Test Report
Assesses the tear resistance of the film as a measure of product strength.
B Series – Resistance to Heat Test Report
Tests dimensional stability under heat exposure, ensuring the film maintains its form.
B Series – Phthalate Content Test Report
Confirms film is free from harmful phthalate plasticisers, safe for indoor use.
B Series – Pencil Hardness Test Report
Confirms scratch resistance with a 3H pencil hardness rating.
B Series – Material Safety Data Sheet
Safe handling information, material composition and potential hazards.
B Series – Heavy Metal Content Test Report
Confirms absence of brominated flame retardants and harmful heavy metals.
B Series – Gas Toxicity Test Report
Assesses gases released during fire exposure to evaluate toxicity.
B Series – Fire Retardant Approval Certificate
Type approval for flame retardant materials from the Korea Fire Industry Technology Institute.
B Series – Elongation at Break Test Report
Tests flexibility and stretch capacity before breaking point.
B Series – Contamination Resistance Test Report
Demonstrates resistance to staining and damage from everyday substances.
B Series – Korea Eco-Label Certificate
Confirms B Series meets eco-label standards for low emissions and reduced harmful substances.
B Series – Antimicrobial Activity Test Report
Tests effectiveness against bacteria such as Staphylococcus aureus and E. coli.
B Series – Adhesive Strength Test Report
Confirms adhesive strength for a reliable surface bond.
B Series – Abrasion Resistance Test Report
Tests durability against wear and abrasion over 1000 cycles.
B Series – Atopy Recommendation Letter
Recommends B Series Interior Film as suitable for allergy-sensitive environments.
3M DI-NOC – Technical Data Sheet
Full technical specification guide covering performance, heat and stain resistance.
Lloyd’s Register – Fire Approval (2017)
Confirms L Series Interior Film meets marine fire safety standards with low flame spread and minimal smoke production. Approved for use on ships and offshore installations.
UL Certification (R26170)
Fire safety certification from Underwriters Laboratories. Verifies flame spread and smoke development when applied to cement board.
OEKO-TEX Certification (2023-2024)
Tests for harmful substances to STANDARD 100, Class I (suitable even for baby articles). Confirms product safety for human health.
LX Hausys – L Series UL Test Report (2009)
Provides detailed fire test data supporting the UL Certification, including surface burning characteristics.
LX Hausys – L Series RoHS Test Report (2020)
Confirms the film is free from restricted substances such as lead, mercury and cadmium in compliance with the European RoHS Directive.
LX Hausys – L Series REACH Test Report (2020)
Verifies compliance with the European REACH regulation by testing for Substances of Very High Concern (SVHC).
LX Hausys – L Series UL Authorization (R26170)
Authorises use of the UL Mark on wallcoverings. Product is subject to UL’s ongoing compliance monitoring.
LX Hausys – L Series SGS Railway Test Report (2019)
Confirms L Series Interior Film meets fire safety standards for use in railway vehicle interiors in India.
Lloyd’s Register – Marine Certificate Module B (2017)
Confirms compliance with the European Marine Equipment Directive (MED) for low flame spread, allowing use on ships.
ISO 9001 Certificate (2021-2024)
Certifies LX Hausys quality management system complies with ISO 9001:2015 international standards.
CE Certification
Confirms decorative wallcoverings meet EU health, safety and environmental standards, including fire reaction.
CE Certification (KA5008 – Others)
Previous CE approval confirming decorative wallcoverings meet EU safety standards including reaction-to-fire.
B2 Fire Test Report
Initial German DIN 4102-1 assessment of L Series Interior Film, testing performance for potential B2 fire classification.
B1 Fire Test Report
Full German DIN 4102-1 classification. Confirms L Series Interior Film is “hardly flammable” (Class B1) when applied to steel.
L Series – Technical Data Sheet (2023)
Provides product specifications: physical properties, finishes, dimensions and application surfaces.
L Series – Warranty (2021)
Three-year limited warranty covering durability and performance of L Series Interior Film in indoor use.
B Series – Environmental Hazards Test Report
Confirms B Series Interior Film contains no harmful heavy metals such as lead, cadmium, chromium or mercury.
